| James Cadman Heating Technologies
Ltd was founded to meet our client’s
demands in this growing market.
Our partnership agreements with
Isocrete for the installation of
Isowarm and Rehau for its underfloor
heating and cooling systems places
us at the forefront of underfloor
heating and cooling. |
James
Cadman Heating Technologies are
able to offer both the heating
system you require and the floor
screeding, installed as a package.
By dealing with The Cadman Group
the contractor is removing the
split responsibility faced when
letting separate orders for underfloor
heating and screeding, or worse,
the scenario of an underfloor
heating contractor subletting
the screeding package to an unproven
screeding subcontractor.
|
Utilising
today's modern multilayer pipes,
control systems and high efficiency
boilers, the underfloor heating
systems of today are extremely
comfortable and controllable.
Radiators are no longer needed
so giving flexibilityin design
within the room space. The heat
is more evenly distributed and
circulation of dust is greatly
reduced.
|
| Underfloor heating from the whole floor area of the house gently warms the air above, eliminating cold spots. The warm air convects from the floor surface losing approximately 2 degrees centigrade at 2.0 meters above the floor, which makes the system ideal for all ceiling heights. |
| Independent tests reveal that the most acceptable indoor climate is one in which the floor temperature ranges between 19-29°C and the air temperature at head level ranges between 20 and 24°C. With radiator or convector heating systems a vertical temperature gradient is produced; colder at foot level than at the head. |
| Underfloor Heating is a favored choice for industry professionals, practical, cost-effective and flexible. Underfloor heating is increasingly being specified over traditional radiator systems and establishing a reputation as the preferred modern-day heating solution. Underfloor heating systems are particularly adaptable and can be installed in both old and new buildings under a wide range of floor coverings. Under floor heating and cooling system can be used in most buildings |
|
|
| Some of the benefits include:- |
- Long Life – pressure stability across the temperature range gives a
projected life well in excess
of 50 years BS7291.
- Low frictional resistance through pipe and fittings results in low noise transmission
- All products are manufactured to ISO 9001 standards.
- Comfort – Even spread of heat provides a high level of comfort.
- Economy – reduced demand on boilers and no wasted heat at ceiling height
saves costs.
- Cost-efficiency – Reduced on-site maintenance – servicing of boilers
and pumps only.
- Flexibility – Unrestricted wall surfaces in both old and new buildings.
- Safety – No hazardous wall projections or hot surfaces.
- Control
|
| Heating
technolgies download area |
